Crack Filling Equipment | Cold Pour Crack Sealing Equipment | Crack Filling Application Equipment | Pump System for Cold Applied Crack Sealants
CrackPro pump systems set the industry standard for portable cold-applied pourable crack filler applicators. CrackPro Cold-applied crack filler applicator units are available in several sizes. CrackPro portable units are designed to draw cold applied crack sealants from pails and drums and pump through a hose and wand directly into cracks. Also ideal for spraying pavement sealers with and water base tack coats.
CrackPro 3500 Cold-Pour Crack Filler Application Unit
Ease, Convenience, & High Performance
CrackPro 3500 Standard Features:
- 50-foot hose and spray wand
- Air wand attachment for blowing out cracks
- Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1 ½ inch material discharge outlet.
- Crack Shoe and Straight Pipe Applicator Attachments
- 9 H.P. Honda Engine
- Basket Strainer to reduce clogging
- Suction Hose for pails and drums
- Also sprays pavement sealer with sand and tack coats
Specifications:
- Engine: 9 H.P. Honda
- Material Pump:
– Type: Air-operated Dual Diaphragm
– Discharge: 1 1/2″ - Air Compressor:
– SCFM: 24
– PSIG: 125 - Height: 50″
- Width: 25″
- Length: 56″
- Weight: 440 lbs.
CrackPro 3000 Cold-Pour Crack Filler Application Unit
The Portable Solution for Applying Cold Pour Crack Sealants
CrackPro 3000 Standard Features:
- 50-foot hose and spray wand
- Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1- inch material discharge outlet.
- Crack Shoe and Straight Pipe Applicator Attachments
- 5.5 H.P. Honda Engine
- Basket Strainer to reduce clogging
- Suction Hose for pails and drums
- Also sprays pavement sealer with sand and tack coats
Specifications:
- Engine: 5.5 H.P. Honda
- Material Pump:
– Type: Air-operated Dual Diaphragm
– Discharge: 1″ - Air Compressor:
– SCFM: 14.6
– PSIG: 125 - Height: 33″
- Width: 22″
- Length: 41″
- Weight: 220 lbs.
CrackPro 2000
Economical pump unit that plugs into any air compressor (10 cfm or higher)
(Requires Separate Air Compressor)
CrackPro 2000 Standard Features:
- Use your own compressor- minimum 10 cfm
- 50-foot hose and spray wand
- Crack Shoe and Straight Pipe Applicator Attachments
- Dependable Low Maintenance Air-driven Dual Diaphragm Material Pump-shifts to neutral automatically when wand is shut off. 1- inch material discharge outlet. (Requires separate air compressor to operate)
- Basket Strainer to reduce clogging
- Suction Hose for pails and drums
- Also sprays pavement sealer with sand and tack coats
Specifications:
- Width: 23″
- Length: 30″
- Weight: 114 lbs.
- Flow Rate: 20 GPM
- Pressure: 100 PSI