SealMaster E-Z Stir

Asphalt-Based Pavement Sealer

The Sealer That’s Ready-To-Use! Simply stir, pour, and apply by squeegee, brush, or spray!

Features

  • Ideal for maintenance crews and Do-It-Yourselfers
  • Fortified with sand for slip resistance and durability
  • Ideal for driveways and parking lots

The Sealer that’s Ready to Use!

Sizes Available

5 Gallon Pail, 55 Gallon Drum

Colors Available

Black

* Colors may vary slightly from actual product.

Coverage

One gallon of E-Z Stir Pavement Sealer will cover approximately 70-82 sq. ft. (7.8 to 9.1 sq. yards) per coat when properly mixed and applied.

NOTE: Coverage rate may vary due to pavement age, porosity, and method or application.

Download

SDS (PDF)
Spec Sheet (PDF) – English | Spanish
Catalog

Description

E-Z Stir is a ready to use asphalt emulsion pavement sealer fortified with silica sand for added wearability and slip resistance.

Surface Preparation

New asphalt surfaces must cure a minimum of four weeks under ideal weather conditions before application. Surface must be clean and free from all loose material, dirt, and dust. Cracks should be filled with SealMaster Hot Pour or Cold Applied crack fillers. Treat all grease, oil, and gasoline stains with SealMaster Petro Seal or Prep Seal.

Mixing Procedures

Stir thoroughly before using. Do not dilute.

Application

Apply one or two coats of material. Apply by squeegee, brush or spray. Allow a minimum of 2 to 4 hours drying time before applying second coat. Allow 24 hours before parking cars or allowing traffic to resume.

Important

Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up

Wash tools in water before material dries.

Unit Size Unit Weight
5 Gallon Pail 56 lbs.
55 Gallon Drum 620 lbs.